Parking Brake Cable Replacement

My assumption is that you are not trying to replace the entire brake cable outer sheathing and inner cable but just the inner cable in the OE sheathing.


Same basic thought as mbaird but get some bailing wire or the like. try to make a rounded end on the end you are starting into the sheathing (make a 180 deg bend on the end and solder and smooth the area so there is nothing that can get stuck if you need to pull it out.) Feed it through the sheathing, the tricky part will be to attach the bailing wire to the brake cable with a strong and smooth connection (solder /weld???) and pull it back through. I would suspect lost of lube would help too.

good luck.