Lash Caps....Seven Came Off

Jay Anderson said
So is it possible I could take a look at the roller swipe and if needed, go to a shorter pushrod?

If you have shafts you can change the pushrod length all you want and it won't matter. You have to change the position of the shaft.

The only time I use lash caps is if the stem height is too short (which is very rare) or using 5/16 or smaller diameter stems.

Get rid of the lash caps if you can.

If you have magnum heads than yes, you adjust pushrod length to correct geometry, within reason. Then you have to move the stud.