Duster A-Pillar Moldings

-

Jim Kueneman

FABO Gold Member
FABO Gold Member
Joined
Jul 26, 2016
Messages
3,575
Reaction score
7,833
Location
Sonoita, Az
I am getting closer to making the deal on a '72 Duster and looked it over good this evening. The A-Pillar moldings in the car are shot (mostly gone). Does anyone make any reproductions? I quick search is not turning up anything.
 
Jim , are you the same guy that built the 68 Coronet 500 over at FBBO? if so , please do a build thread if you end up with an A body. that was outstanding work.
 
Jim , are you the same guy that built the 68 Coronet 500 over at FBBO? if so , please do a build thread if you end up with an A body. that was outstanding work.

Yes I am and yes I plan to. Thanks for the complement. This project is more of a project and a half! I am buying parts and pieces from a guy who has a back yard full of a-bodies and the Duster is a roller. A basic /6 that I am going to transplant a 74 factory 318 AC Dart everything from the dash forward to get 4.5 bolt pattern disks and a B Body 8.75 rear axle.
 
Yes I am and yes I plan to. Thanks for the complement. This project is more of a project and a half! I am buying parts and pieces from a guy who has a back yard full of a-bodies and the Duster is a roller. A basic /6 that I am going to transplant a 74 factory 318 AC Dart everything from the dash forward to get 4.5 bolt pattern disks and a B Body 8.75 rear axle.
you definitely came to the right place if you need answers, there are lifetimes of knowledge here
 
-
Back
Top