Sorry, but another brake pedal question

AJ/FormS said
Yeah IDK how it can find it's way back in. But if there is a booster on it, well there the pushrod is guided. However if it misses seating properly in the control valve, then a hard stop can break it, and then IDK what would happen.
I had a neighbor once with an old Ford Galaxie, that when he touched the brakes they came on full bore, slamming you forward hard. I traced it to a broken control valve.

I had a Lincoln MK4 that did that, and it sucked.:D
Only way to get it to let go was to either wait quite awhile till the vacuum booster bled all the way down, or pull a vacuum line.
New booster fixed it.

56Steve said
What is weird it brakes fine, where I noticed a problem is when my shoe got caught up under my brake pedal and it brought it way forward, like up to the dash bottom?

Even so, it warrants a good look to find out why it happens and do whatever it takes to get it the way it is supposed to be.
Your brakes could be hanging by a thread, or it could just be something stupid and easy to solve.

CudaCraig said
On my 4 speed the brake pedal is held in check by the clip on the back of the master cylinder and also the brake light switch...68 B cuda

My Dart has both of those also.
Any way I can imagine 56 Steve's huge gap happening would make me unsettled.:D