Got any photos of installed clutch linkage to share? I'd like to compare. I have a converted from auto Duster and it started doing this... (video). I'm concerned that the geometry is off at the stud on the fender, forcing out the spring retainer out.
Installed Clutch Linkage Photos [video]
- Thread starter dust
- Start date
-
Daves69
Well-Known Member
Check to make sure your clutch fork is all the way on the pivot.
Some pictures of a swap here may help.............
727 Torqueflite Transmission Conversion - Crammin' The Crash Box - Mopar Muscle Magazine
Some pictures of a swap here may help.............
727 Torqueflite Transmission Conversion - Crammin' The Crash Box - Mopar Muscle Magazine
Last edited:
replicaracer43
Grumpy Old Man
- Joined
- Oct 10, 2008
- Messages
- 6,051
- Reaction score
- 7,867
Definitely not right, possibly not the right z bar?
daliant
Befuddled
The wire clip on the Z bar is supposed to key into the grooves on the pivot ball bushings on the frame side ball preventing the Z bar from moving side to side. Either the clip popped out of the bushings or the bushings are broken.
-
