finaly got something done..

Ok long weekend ahead and supposedly going to be fair weather so i got some help from my fantastic girl to use the Durango to pull the Duster out of the garage,now with the Duster standing there in the sun those sweet lines makes me just want to get going to get her on the road again.
Todays project is to get the subframeconnectors done or atleast started,and hopefully go to buy some of those spotweld drillsbits for the next step.
Have thougt alot about what order to do things in,those rockerpanels sure seems alitle complicated to cut out, without giving myself a bunch more problems than i already have.
the plan so far is

1 make subframeconnectors.
2 cut out the outer 10 or so inches of the floorboard.
3 break inside of rocker loose by cutting and drilling out spowelds while trying to keep as much of outer rocker intact to have as a reference.
4install inside rocker.
5 cut out ouside rocker and screw up as little as possible of the quarterpanel infront of the wheelhous as possible(yeah i believe im goint to need to cut the lower part of the quarterpanel out to get to the spotwelds and will have to fab up some kind of replacement for that panel later since i could not afford that piece of reprometal at this time.)
6 install new outside rockerpanel.
7 repeat step 2-6 on the other side.
8 cut out rest of passanger compartment floorboard.
9 install new floorboard.
10 create new outside floorpanels over the leafspringmounts(i believe i will have to cut thouse out to get to the rockerpanels and thats fine,they are rusted out and have some hideus repairs done anyway.)

Hmm parts of this post should probably be posted in the bodysection of this forum for input from smarter /less dumb people to make sure im not going at this in a stupid way.

writing it like this makes it seem easy,i bet it will get worse when the plan crash headon into reality:D