Early Barracuda windshield gaskets

Use the rope method on both as #Backintime stated...make sure you have a lot of excess where your rope ends overlap. I always use a small rope so when I pull it helps the seating. To Big and your gasket won’t overlap the pichweld correctly. Use a good lubricant before you install the rope, start at the bottom on both glasses...try and get a bottom corner started first...pull one end of the rope so it will open up the gasket and start working your way around the entire glass. NEVER hit the front windshield to make it try and make it seat...the back glass is more forgiving and you may have to wrap the rope twice to aid in the seating of something that large.

When you get your new gaskets let them lay out for a day or so they’ll be more manageable and hug the glasses better.