tti Header Hitting Torsion Bar

512Stroker said
67 Barracuda, 340 with 727 trans
The number 7 tube is hitting the torsion bar toward the topside of the bar.
I placed an 1/8 inch shim between the K member and the motor mount on the drivers side it help but did not fix the problem.
I tried to move the engine over to make more clearance, but it appears that the motor mount stud is bottomed out in the slots in the K member not allowing any movement except upward.
Has anyone dealt with this ?

the distance from centerline on crank to top of K-member is suppose to be 5 1/4" per TTI instructions. I am about to start putting my TTI headers in my 70 duster and as soon as I get my tranny in and will let you know what I find out! it looks to be a tight fit! if you do not have the instructions, go to the TTI site and down load them!