[FOR SALE] 225 block and parts

-
Status
Not open for further replies.
Blackhatguy

Blackhatguy

FABO Gold Member
FABO Gold Member
Joined
Dec 20, 2017
Messages
257
Reaction score
156
Location
Iowa
Rating - 100%
1   0   0
Contact seller
I have a 225 block with crank and pistons. It has been bored over 60, still has about 70% of its cross hatches and no slop in the Pistons. Turns over by hand, but will need honed. $100, but shipping will be tricky.

I also have the intake manifold, one barrel 1920 style. No cracks, and threads are clean. $30 + ride

And the exhaust manifold, also with no cracks, but the heat Riser shaft has a little slop in it. $30+ ride.

Also have the head, looks decent but a couple of the valves do not look original. $45 + ride

I also have the rocker shaft assembly. All of the Rockers look decent, and the adjusters are tight. $25 plus shipping

0520181104.jpg


0520181105.jpg


0520181105a.jpg


0520181106.jpg


0520181105b.jpg
 
Blackhatguy said:
I have a 225 block with crank and pistons. It has been bored over 60, still has about 70% of its cross hatches and no slop in the Pistons. Turns over by hand, but will need honed. $100, but shipping will be tricky.

I also have the intake manifold, one barrel 1920 style. No cracks, and threads are clean. $30 + ride

And the exhaust manifold, also with no cracks, but the heat Riser shaft has a little slop in it. $30+ ride.

Also have the head, looks decent but a couple of the valves do not look original. $45 + ride

I also have the rocker shaft assembly. All of the Rockers look decent, and the adjusters are tight. $25 plus shipping

View attachment 1715177812

View attachment 1715177813

View attachment 1715177814

View attachment 1715177815

View attachment 1715177816
Click to expand...

What kind of shipping prices am I looking at for a ride to Indiana, 47401?
 
might want to seperate the 60 over pistons if you don't get a block buyer.
 
Ahatchett said:
T

The .60 over part is the only reason I want it. I figure I'll swap it into my 64 dart and have some more fun:lol:
Click to expand...
I got the cylinder head you can hop up too. biggest thing holding the slant-6 back is the tiny stock port design, hog that sucker out!

I just sent in a quote request to Fastenal, I'll let you know as soon as I hear back from them.
 
Guy's , to much chit chat in this for sale thread, take it to a privet conversation please :thumbsup:

Thank you, and good luck on the sale.
Staff member, memike.
 
Ahatchett, go for it! my piston post was for the seller if he didnt get a buyer. I remember giving a slant away because there was 0 interest here.
 
Status
Not open for further replies.
-

Back
Top