Giving Up?

684door said

Thanks MOPAROFFICIAL. I pulled my fork and fork pivot yesterday. They are straight and not bent. I like your idea moving the hole up 3/8th of an inch. That would give me more adjustment. Thinking of making a spacer to extend that pivot.

Question: When you said zero the fork and then back off 1/2 turn, I assume you mean run the throwout bearing up till it touches the clutch fingers and then back off 1/2 turn. Am I understanding that right? I will try anything at this point.
Thanks

Click to expand...

Extending is what I meant when I said "3/8 taller"
Yes, adjust the fork/throw out bearing till finger contact then back half a turn.
Some people like the pedal to engage when barely off the floor, others want it mid throw... I like mid throw/half peddle.

At the moment my Fork is sometimes scraping the top of my TTI headers, I've install the spring that attaches to the bellhousing a little higher up and it works normal driving so far. I might just cut 2" from the eye 80% the way from the top edge, bend it closed and weld it up to fix that. Getting tired of messin with it.