Its been a little while.......

Ok, I found that the engine is stock bore with new pistons, rings, bearings, cam shaft bearings, etc. It has the 1984 heads on it but all new valves including 2.02 intakes have been installed and I realize that the heads are the weak point of this engine but that can be changed in the future. I don't know what cam or springs were installed in the build so I have to come up with a cam kit that will work with what I have. The engine is going in a 68 Barracuda fastback with a A727 automatic and 3:23.1 sure grip rear end and I would greatly appreciate some feed back on cam selection.