Rebuilt Thermoquad issue -- It has to be primed before start each time
1. Squirter Nozzle
I never actually removed it during the "rebuild" but I checked and it was in place. With mouth i could blow air though the hose so it exited though the nozzles in the primaries but couldn't suck air back. Pic. 1
2. Tube
Was not damaged, disconnected or clogged Pic.2
3. Mini "oil pans" for fuel
Well spotted AJ/FormS, I did not break them off I just globbed fuel on the outside after roughing up the surface with a dremel.
I dried everything up, filled them with gasoline and waited 15 minutes but not a drop of moisture came through Pic. 3
Anything I could have missed? :realcrazy:
1. Squirter Nozzle
I never actually removed it during the "rebuild" but I checked and it was in place. With mouth i could blow air though the hose so it exited though the nozzles in the primaries but couldn't suck air back. Pic. 1
2. Tube
Was not damaged, disconnected or clogged Pic.2
3. Mini "oil pans" for fuel
Well spotted AJ/FormS, I did not break them off I just globbed fuel on the outside after roughing up the surface with a dremel.
I dried everything up, filled them with gasoline and waited 15 minutes but not a drop of moisture came through Pic. 3
Anything I could have missed? :realcrazy:
