[WANTED] Super Trick Wheels

-
Status
Not open for further replies.
Malex

Malex

Well-Known Member
Joined
Apr 22, 2016
Messages
437
Reaction score
1,267
Location
Canada
Rating - 0%
0   0   0
Contact seller
Looking for a set of Cragar Super Trick Wheels. Either 15 X 10 with a 3.5" to 5" back space. OR. 15 X 12's with a 5.5" back spacing. 4.5 / 4.75 bolt pattern.
Screw holes for slicks are OK.
Please PM me with what you have.
Thanks!
 
Hi have some 15x12's still on my Hemi Dart. I do not know the backspacing but can take them off and measure.

104_0227.JPG
 
HemiSSDart said:
Hi have some 15x12's still on my Hemi Dart. I do not know the backspacing but can take them off and measure.

View attachment 1715189226
Click to expand...
Hello and thanks! I'd greatly appreciate that. Will wait to hear back from you.
That sounds like quite a Dart that you have. Would you mind telling me a little about it please.
 
My Hemi Dart was originally bought at Mr. Norms Grand Spaulding Dodge in Chicago, IL by Richard Shipley from Baltimore, MD and raced primarily on the east coast. Originally a 4-speed car it was switched to an automatic quickly to be competitive. Only raced by Richard for a couple years it then went to Joe DeSantis who raced it until around 1972 when it was retired. There were a few owners after that then the car was stripped and let outside to rot in a field, but luckily was rescued by a friend who sold it to me about 10 years ago. I have been collecting parts to do the restoration and am close to starting on it. I bought aluminum slots for the car and will be taking the tricks off it soon. Here are a couple pictures in it's glory days...

poisondartb&w.jpg


The Poison Dart 2 (3).jpg
 
Good morning. What a terrific piece of history that you have there! That will be one restoration that will have a lot of guys interest, me being one. Would you be going back to a 4 speed or leaving it an automatic? I guess that depends on whether you plan to race it.

That sounds great about the Super Tricks. Hopefully they're what I'm after. Ok thank you and I'll wait to hear back from you.
Mike.
 
Well the shop got flooded last night, luckily the cars are in a different area and did not get affected. I probably won't be able to get a look at the wheels until Saturday now, burned out moving parts and sucking up water, Rockford Illinois got hit HARD!
 
Oh ****. Sorry to hear but glad that your cars weren't effected. Whenever you get around to checking is just fine.

IMG_2795.JPG
 
Last edited:
I have 15 X 12 Super Tricks on my Barracuda. They have 7 3/4 backspacing, 4.5 & 4.75 bolt pattern and screw holes for slicks and are also polished. I also have other Super Trick halves so several backspace wheels could be made (will have to measure). Will consider selling all parts but I need a set of Centerline 15 X 12 with 7 3/4 backspacing. Polish preferred but I can polish if satin.
 
Blucuda413 said:
I have 15 X 12 Super Tricks on my Barracuda. They have 7 3/4 backspacing, 4.5 & 4.75 bolt pattern and screw holes for slicks and are also polished. I also have other Super Trick halves so several backspace wheels could be made (will have to measure). Will consider selling all parts but I need a set of Centerline 15 X 12 with 7 3/4 backspacing. Polish preferred but I can polish if satin.
Click to expand...
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
You got the parts to make a 8 1/2" , or 9" wheel , with a 3 1/2" backspace ?? 15" , 4.5 bolt circle ,of course.
 
Status
Not open for further replies.
-

Back
Top