Where do each of these wires go?

I installed the express kit and never referred to the factory diagram. I recall that on the column, I tested each of the 5-7 wires in all key positions...ign 1, 2, start, run, etc. To make it easier I made a small chart with wire colors on one side and key position on the other axis. If a wire had power in a particular position, I put a (+) in that box...if there was no power, I put a (-). I'd be careful about trying to follow the factory diagram as that may lead to confusion or assumptions that may not work out. I called RF once while I was installing and they were very helpful if you get to that point.
Did you get the car started? If I recall correctly, after the first bag, you should be able to start the engine. I followed the instructions bag by bag of wire in order.