Upper control arm I.D. or I think I got took

barracudadave67 said
From what I have found out today. I called Firm Feel, and gave them the O.D. measurements of 11 1/2 inches, from outside of bushings, to out side of bushings, and I.D. measurements of 7 3/4 inches bushing to bushing, and he told me they were "B", and "E" body Upper arms. The factory arms are real close to the measurements without the bushings.
Measurements on the firm feel w/o the bushings is... O.D. to O. D. 10 3/4 inches. In side measurements are I.D. to I.D.
7 3/4 inches. factory arms are about the same.

Dave

barracudadave67 said
72
The measurment on your "B" and "E" body arm is what I get on mine, also.
The "A" body one is the same as mine also.
Thanks for confirming that for me.

Dave

No problem!

So your tubular arms are for a B/E body then? At least they're Firm Feel tubular arms. I would imagine you could sell those and the B/E original UCA's you have for a decent chunk of money and recoup enough to buy a good set of tubular A-body UCA's if that's what you want.