New life for an old 340 (stock stroke)
After the decking it was on to cylinder honing. Torque plate installed and bores measured 4.098-4.099" . Got lucky here as I was able to straighten the taper and out of round the torque plate caused and still hit the 4.100" dimension. When the pistons come in I will measure the skirts and verify the clearance is correct . J.Rob
After the decking it was on to cylinder honing. Torque plate installed and bores measured 4.098-4.099" . Got lucky here as I was able to straighten the taper and out of round the torque plate caused and still hit the 4.100" dimension. When the pistons come in I will measure the skirts and verify the clearance is correct . J.Rob
