Edelbrock RPM heads, open-chamber LA SBM

I have a pair of Edelbrock aluminum heads #60179, these are the open-chamber type for use with positive-deck pistons. I bought them sort of impulsively because they popped up for a good price but after buying them I realized it would be too much trouble to get them to work on my 5.9L Magnum block. They are used and the previous owner had them on an engine that broke a rod; all the exhaust valves and one intake valve are bent (shown in the last pic of the 2 valves). I disassembled, cleaned and checked them out, the guides are all still in fine shape, possibly on the tight side even. The heads came assembled with springs, spring seat washers, seals, retainers, locks, and valves; I will include all of that minus the bent valves unless you want those for some reason. At the very least these heads could use a valve job, I'd also recommend having the guides reamed a hair or at least checked by a machinist. I'm looking for $750 plus shipping FIRM. Located in Fort Collins, CO 80524. Any questions feel free to ask!

20180627_110127.jpg

20180627_110132.jpg

20180627_110155.jpg

20180627_110200.jpg

20180627_110315.jpg

20180627_111203.jpg

20180627_111210.jpg

20180627_111535.jpg

20180627_111648.jpg

20180627_111654.jpg