Solid Rollers on a Hydraulic Grind Cam

Some mentioned that the comp 274 was lacking in low end for their build but ran good mid and up top
here are some suggestions starting with 10 degree less seat duration but trying to maintain similar at 200
some catalog grinds and some .904 lobes where you can spec your own exhaust lobe and LCA
Lift Lobe seat .050 .200 LCA and icl (not all info is available for all vendors)

(seat durations not adjusted) .050 and .200 will look bigger to the engine at the valve with higher ratio rocker

.535/525 265/273 218/226 138/ @200 110/106 LA 1800-5600 1.6 intake rocker

540/506 267/267 220/220 140 / 108/104 smallest H .904 shelf cam 1500-5400 wants headers } 1.6 intake rocker

.522 268 330 136 Bullet CTA 1.6 intake rocker

.445/465 269/277 215/223 112/108 H720031-12 Howard .842 universal profile 1.5 rocker

.513 0.342 269 222 142 HM2223423A .904 HM is Howard 1.5 rocker

.542/ 1.6 .269 222 142 HM2223423A .904 HM is Howard with 1.6 rocker

.528/513 271/279 226/234 110/106 1800-6200 2400 stall Lunati Voodoo 1.6 intake rocker

.553/543 271/281 224/234 112/108 Howard with 1.6 intake rocker

.525 .350 273 226 147 HM2263500 with 1.5 rocker

.560 .350 273 226 147 HM2263500 with 1.6 rocker

.538/534 274/282 224/230 149/154 110/106 XR274HR-10 MI 26.6(13.1/13.5) XE retro fit 6 38 49 1 (7) Comp HR
.525/525 275/287 231/237 149/ 110 comp XE275HL 2000-6000 smallest comp .904 HL grind
Bullet and Lunati have masters at roughly 2 degree intervals and Howard has a bunch