Found another option,some dome pistons has solid domes that can be cut down to fit different chambers or even be made into flattops with a popup,might be worth looking into,there is two partnumbres for a 4.08 bore 340. 340
Thank you for your help obviously I messed up by purchasing the 340 Rpm head I should have just purchased the reg 340 head .
Im ordering custom pistons next week and will need some guidance from u veterans within the forum . Machine shop said that mycontent://media/external/file/91436.block
Found another option,some dome pistons has solid domes that can be cut down to fit different chambers or even be made into flattops with a popup,might be worth looking into,there is two partnumbres for a 4.08 bore 340. 340
Thanks for your input Im ordering custom pistons for my project and will of course need some guidance.
Machine shop said my block needs decking so other than that my components are cut and dry
Im running stock stroke with factory steel crank and Scat 6.123 H beam rods and would like to have around 11.5.1 or just under 12.1 compression I found a nice piston with the specs close to what I want but of course its offered for the 4.0 stroke engine.
