Well, look what we have here!
Where did I say I made that number with a 2.02 valve? I never said that.
I know that and I never said you did.
You pulled that out of your hat.
Now now, don’t loose your hat..... again.... LOL!
Are you working the RAMM school of making up details?
Now now, don’t insult RAMM through me! Be nice.
My heads used a 2.100 intake. If I did it again, I'd only use a 2.08 valve.
You never said that to begin with. What you said is below in quotes.
Don’t start putting words into my mouth or assume. I tell you straight out no problem you know that. Calm down, don’t blow an artery!
There is WAY more to making power than flow. My W-5's went 355. If I had another pair to start from scratch I could add another 20 to that on a 2.08 valve.
Looking at what you wrote, above, it leaves holes in, “Information!”
Now after reading what you followed up with, a 2.100 valve, it finishes off what IMO you should have added in, in the first place.
Considering the head comes with a 2.02 to start with and your lack of information only leads one to think that the valve first used was a 2.02, then you went to a 2.08.
