Cruise control will not work .
The basic power flow is from fuse or hot terminal in the dash harness to the controller then through the On-OFF button in the on position through the blue wire to the brake switch on to the other blue wire to the single terminal on the servo. As far as I know, no click or other indication that the cruise is engaged until you actually set it while driving. There is a way for a visual indication, PM me for more info.
FWIW here are the 2 controllers I have:
the top one I pulled out of a 73 or 74 Swinger and was factory installed. The bottom one is a NOS unit from 1970/71, which I will be using in my 65 Dart wagon since it looks more period correct than the top one.
The basic power flow is from fuse or hot terminal in the dash harness to the controller then through the On-OFF button in the on position through the blue wire to the brake switch on to the other blue wire to the single terminal on the servo. As far as I know, no click or other indication that the cruise is engaged until you actually set it while driving. There is a way for a visual indication, PM me for more info.
FWIW here are the 2 controllers I have:
the top one I pulled out of a 73 or 74 Swinger and was factory installed. The bottom one is a NOS unit from 1970/71, which I will be using in my 65 Dart wagon since it looks more period correct than the top one.
