FiTech Dual Quad
LMAO, actually on the ride home today I got the feeling they're fouled now. I'll try the NGKs, I used to run those in an efi turbo car I had and was pleased with them. I believe it will be an improvement.
I built the scoop years ago, it used to just sit on the carbs alone. I took the bottom of the Summut Hilborn-style scoop, modified it a little, modified a newspaper box a little, welded up a small frame from square tubing to fit inside the box. Flat head bolts go through bottom of scoop, box, and frame. Threaded rod goes through the frame with wing nuts, this part of the frame is attached only in the middle, so there is tension on the wing nuts when tightened. Found a k&n air filter that fits a mid 90s gm air box, it was actually in a counter top demo thing and I brought the box in to try it. Trimmed the sides a few millimeters, plastic tabs in the box and two small brackets outside hold it in place. No round filters fit.
One day, I took the tops off the two air cleaners, put in longer rods, and set the scoop on, it slips right inside the air cleaners.
Pics show carbs with just scoop, and efi with air cleaners and scoop.
LMAO, actually on the ride home today I got the feeling they're fouled now. I'll try the NGKs, I used to run those in an efi turbo car I had and was pleased with them. I believe it will be an improvement.
I built the scoop years ago, it used to just sit on the carbs alone. I took the bottom of the Summut Hilborn-style scoop, modified it a little, modified a newspaper box a little, welded up a small frame from square tubing to fit inside the box. Flat head bolts go through bottom of scoop, box, and frame. Threaded rod goes through the frame with wing nuts, this part of the frame is attached only in the middle, so there is tension on the wing nuts when tightened. Found a k&n air filter that fits a mid 90s gm air box, it was actually in a counter top demo thing and I brought the box in to try it. Trimmed the sides a few millimeters, plastic tabs in the box and two small brackets outside hold it in place. No round filters fit.
One day, I took the tops off the two air cleaners, put in longer rods, and set the scoop on, it slips right inside the air cleaners.
Pics show carbs with just scoop, and efi with air cleaners and scoop.
