[WANTED] Duster floor pan piece

Bbod · Jul 15, 2018

i am restoring a 71 340 duster and looking for a piece of drivers side floor pan. I need the pan from the rear of the torsion bar forward. The duster is an auto car. I am trying to replace the pan at the factory spot weld areas so am only interested in a pan that was removed by drilling out the welds. It of course would have to be cut in the tunnel area. I know it’s a long shot but I thought it was worth a try. Please pm me if you have one for sale. Thank you for your time

Oldmanmopar · Jul 16, 2018

They sell them new . Don't get the one with the slotted corners. Set the pan in the car spray it from the underside and drill the holes where they line up with the rails. No rocket science here. just a can of paint and a drill

For Dodge Dart 67-76 Sherman 195-40L Front Driver Side Floor Pan Patch Section | eBay

Bbod · Jul 16, 2018

Thank you. The Sherman pan is the one I want?

daddio4048 · Jul 16, 2018

Bbod said:
Thank you. The Sherman pan is the one I want?

Yes;better fit

pauly · Jul 16, 2018

Oldmanmopar said:
They sell them new . Don't get the one with the slotted corners. Set the pan in the car spray it from the underside and drill the holes where they line up with the rails. No rocket science here. just a can of paint and a drill

For Dodge Dart 67-76 Sherman 195-40L Front Driver Side Floor Pan Patch Section | eBay

Agreed. The ones with slotted corners are trash!

[WANTED] Duster floor pan piece

Bbod

Well-Known Member

Oldmanmopar

Going left turning right

Bbod

Well-Known Member

daddio4048

Daddios72

pauly

MOPAR or no car!