[Found!] Circuit Board 2771147

-
Status
Not open for further replies.
domdart

domdart

FABO Gold Member
FABO Gold Member
Joined
Feb 14, 2015
Messages
404
Reaction score
239
Location
Johnstown, PA
Rating - 100%
2   0   0
Contact seller
I need a new circuit board for my 68 Dart. It is the one for the temp and fuel gauges (the right side of the pic) It is part #2771147. Thanks FABO.
IMG_1579.JPG
IMG_1580.JPG
 
I fixed a board that had 2 or 3 traces burned up with some small braided copper ribbon, I think it's used to soak up excess solder? Got it at Radio Shack, maybe Fry's, easy to work with. After it was tied in I super glued spots of it to the board.
 
Last edited:
yearone/classic industries////yearone usually has better prices
 
Scan it, buy the blank board, print the trace pattern on a clear sheet, photo etch your own. It's easy.
 
jazak5 said:
yearone/classic industries////yearone usually has better prices
Click to expand...
I found them at Herb's and Van's. I am hoping a FABO member has a good used one. I started a thread in the electrical forum about repairing mine.
 
Maybe, it would be better replaced. It's a bunch of work to R&R. Just an opinion or thought. Best. Old Dart 66
 
fshd4it said:
I fixed a board that had 2 or 3 traces burned up with some small braided copper ribbon, I think it's used to soak up excess solder? Got it at Radio Shack, maybe Fry's, easy to work with. After it was tied in I super glued spots of it to the board.
Click to expand...
Yeah, glue it down. I did not do that on my 66. Hind sight 20/20. Old Dart 66
 
Status
Not open for further replies.
-

Back
Top