1970 Dodge Dart 318 piston rings

And if you don't mind me saying.... I'd still compare gap measurements (use a feeler gauge) up and down the bores using one ring and see how much the gap varies, to get an idea of the bores' taper. Each increase of .003" in the gap indicates approximately .001" of bore wear. Excess bore taper will wear out rings in a hurry.

And from what I see, I'd do more honing... too much shine and too much vertical scratching left IMHO in the original pix. And in the last pix the honing marks look too flat.... they should cross each other at about 45 degrees apart. Others may want to comment.