Slant 6 K-Frame = LOTS of Clearance

JDMopar said
Here's a 73 V8 Spool mount k frame slightly modified so the factory AC location on a car 5.7 Hemi will fit. I cut the spool saddle off the k frame, and flipped it over and moved it back. I used TTI headers and motor mounts, but I hacked up the drivers side TTI mount and made it into what I have now. I spaced the AC compressor out about a half inch for more clearance on the header tube. It's shown with a factory manual box, but I'm going to try a Borgeson to see if it will fit....and I feel like it will! There's plenty of ways to skin a cat....lol

JD Mopar, What A/C compressor are you using in the picture you posted?
The A/C lines look to have a fairly unobstructed connection area. the Mopar compressor being sold as an accessory to the crate Hemi (Part # 68202994AA) looks to have the connection points for the lines in a different location from what you pictured and it looks like it will interfere with the header. here is your original pic, and an image of the new Mopar compressor for reference

68202994AA compressor.png