Offset shackles/hangers

Fisher said

But wait. I forgot. lol you will have to cut off your original spring pads on the diffy, then move them in and re-weld them on the housing, in order for them to drop back on the leaf springs. Plus you need to measure the pinion angle too before you start, then make sure the pads are at the same angle when they get welded back on.

Click to expand...

I`ve posted this before, but, u can buy a new set of spring pads cheap from jegs. Lay one out and cut it in half lengthways, being very precise. I did mine on a big band saw. Fit it to the inside of ur stock spring pads and weld it up skipping around, to keep from getting too hot in one area". It will be the same angle if u do it right. All you`ll have to do is redrill the holes to match the offset kit u are using. no muss , no fuss !