Low oil pressure?

Wyrmrider said
What timing are you talking about YR rod feed timing
I've had customers who had me drill the front of SBC for front end feed- mostly sprinters and road/ circle track I have/ had a jig for it
I've fed the mains from the side where the bearing halves join
I've put the pressure relief at the opposite end of the block from the pump
lots of things
good points

Yes, rod feed timing. The rest of it will take care of itself. You can put the oil in anywhere you want. As long as the oil timing is correct it will oil. The rest is smoke and mirrors.

I'm not a fan of running two columns of oil at each other. You can have pressure and no flow. I've run into it myself.