Intakes

-
rrvolare

rrvolare

19Swinger69
Joined
Jan 25, 2010
Messages
1,737
Reaction score
127
Location
Michigan
Any single plain intakes fit under stock hood of a 69 dart with a 400 stroker ?
 
383 Street Dominator with a drop based air cleaner. I fit one in a 65 A

510-300-14_4.jpg
 
twayne24365 said:
X2 for Street dominator, that is a FABULOUS intake
Click to expand...
yes sir ! and if you have one , no need to change. been running one since the early 80's.
there is only one intake that will perform a tiny bit better, the edelbrock rpm, but hood clearance can be an issue.
 
That’s what’s on my 383 and I believe getting harder to find.... I saw 3 or 4 at Carlisle all in the $125 range... shoulda grabbed another!
 
torker and eddy rpm worked on my 383 dart . motor out have the dart got hit and i sold the body .
DSC06102.JPG
DSC07281.JPG
 
Was at Norwalk this passed weekend and i seen a b block with a 1 inch spacer with a 383 victor , and it seemed like a air cleaner with a drop down base that seemed to of fit ... I am thinking the Trickflow should then fit ?
 
I have a 1968 Dart with a 383 Big Block. I had a regular performer intake on with stock style pie pan air cleaner and Holley Double Pumper. It cleared great. I then changed to a Eldelbrock Torker. It is just a tad taller, but still clears with the Holley and the stock style air cleaner. In my setup, a Edlebrock RPM without a dropbase air cleaner would not clear.
 
"In my setup, a Edlebrock RPM without a dropbase air cleaner would not clear."

SO a eddie RPM with a drop base air cleaner did fit ?
 
Sorry, that was confusing. When I was doing a little math before I decided which intake I got. A drop base may have let the assembly clear. I was not gonna chance it due to the cost of wrong. Sorry for the confusion
 
You must log in or register to reply here.
-

Back
Top