8 3/4 rear dimensions

Just picked up a junk yard 8 3/4. It was in a bone pile so i dont know what it is out of and some of the measurements are not adding up from the varous sites that list such. The yard didnt have but 2 mopsrs in the 60 to 70s range, one was a 68 Belvidere and a 70s dustr with tubs neither had adiff in it.

Most things add up to 70 to 74 EBody but...

Breather is up on the hip of the housing not on the flat of the tube.

Large bolt pattern

Left hand threads on left axle

Oe axle bearings

Both axles look identical

Purches under housing

742 with Sure Grip / Power-Loc (editeded for the purest in the group), gears say 12 / 66 for date.

There was no tags on the diff, probably was apart at one time.

Small flange u joint

Druns have springs around the OD

One axle measures 30 inches on the end of spline to out side of wheel flange. 65 to 69 C body or 70 to 74 E body or 65 to 70 A100

One axle measures between 30 1/16 to 30 1/8 end of spline to outside of wheel flange checked and it doesnt seem to be bent. 65 to 66 imperial?

Housing measures 56 1/2 out side axle mounting flange to outside mounting flange. 70 to 74 E body?

Purch CL to purch CL 46.
65-'73 C BODY
70-'74 E BODY


Brakes are 11 x 2 1/2

What do you all think?