Pics of (some of) (what used to be) my cars are here.
Other stuff I notice: your carb castings look to be in good condition with little or no warp between the main casting and the air horn.
I plane-sanded a lot to get rid of most warp, maybe too much. I also smoothed the sharp edge in carb throat whwere air horn lands on carb body, for cleaner air flow.....need every bit of help on this 1 bbl. Still a good idea to double up on the gasket at that junction (make sure both gaskets you use have all the correct holes in the correct places; there are differences).
IIwill.
You'r missing the nipple for the choke pull-off hose (maybe it stayed stuck in the end of the hose).
Nipple is with pull off vac hose.
You're missing the tension spring on the curb idle speed adjusting screw.
Thanks.
Than see here and here.[
Did the fuel line mod and .have manifold heat deflector. /QUOTE]
