VIN Number location

-
retroron said:
If you’ve read the entire post, you’ll notice I’ve kept the body shop out of the conversation. He is a great guy, mistakes happen. What I’m trying to do is recover from the loss. If we have to cut paint, then we’ll cut paint . Just set the car on the ground here are some pictures . And thank you for your civil response .View attachment 1715216132

View attachment 1715216133

View attachment 1715216134
Click to expand...
no problem,
I can Imagine the grief it is causing.That vin has to be on the drip rail unless the quarter has been replaced. The factory was not precise where they put it. It could be up by the window, or down close to the tail light. unfortunately, you have to scrape the glue and paint off to find it. if it is there, the Indentation will be present from underneath.same with the radiator support, I have seen them on the top, on the back,facing the engine,(between the radiator and the support itself) and on the front of the support looking straight towards the engine. my demon has it right smack in the middle of the support.
 
retroron said:
If you’ve read the entire post, you’ll notice I’ve kept the body shop out of the conversation. He is a great guy, mistakes happen. What I’m trying to do is recover from the loss. If we have to cut paint, then we’ll cut paint . Just set the car on the ground here are some pictures . And thank you for your civil response .View attachment 1715216132

View attachment 1715216133

View attachment 1715216134
Click to expand...
One more picture, as a friend of mine said, “yep, this one will hold its own”.

02817AD4-728D-4890-B6B6-954F23457FEB.jpeg
 
bronze wheels, nice. didn't notice that in the other pic. what wheels are those. size / offset?
 
kursplat said:
bronze wheels, nice. didn't notice that in the other pic. what wheels are those. size / offset?
Click to expand...
Budnik’s, 19’s in the back, 18’s in the front. No off set in front about 3 inch in the rear, 10 inch tires (wide) in the back
 
And the good news is my body guy just found the vin# on the trunk lip. I should be good to go.
 
On the trunk lip, passenger side. I Like your Demon, if I build another car it will be a gen2 Hemi Demon, but by the time my upholstery is done, I’ll be tapped out!
 
retroron said:
On the trunk lip, passenger side. I Like your Demon, if I build another car it will be a gen2 Hemi Demon, but by the time my upholstery is done, I’ll be tapped out!
Click to expand...
never seen it there, but you know mopar! I bought the demon in San Fransisco four years ago.
originally an Oregon car. 70k actual, original slant six car that runs on air I swear!
 
You must log in or register to reply here.
-

Back
Top