Plug wires for FBO system
Yup, same header design. I got the fiberglass sleeves on those two but there was barely enough room to get them in between the header and head. I would rather route under that pipe with a 90 degree head to keep the wires out of the heat for the long term.
FBO ignition box puts higher voltage out to the plug, so the wire quality could make a difference.
FBO Ignition Systems MOPAR Micro-Processor IGNITION SYSTEMS Digital Micro Processor Circuitry|EPROM Processor with|Built in DEAD STOP Algorithm REV Limiter|Eliminates Ballast Resistor|44KV Output on demand|Plug and Play|one simple wiring modification
Yup, same header design. I got the fiberglass sleeves on those two but there was barely enough room to get them in between the header and head. I would rather route under that pipe with a 90 degree head to keep the wires out of the heat for the long term.
FBO ignition box puts higher voltage out to the plug, so the wire quality could make a difference.
FBO Ignition Systems MOPAR Micro-Processor IGNITION SYSTEMS Digital Micro Processor Circuitry|EPROM Processor with|Built in DEAD STOP Algorithm REV Limiter|Eliminates Ballast Resistor|44KV Output on demand|Plug and Play|one simple wiring modification
