ignition problems hard starting

Hello all here's what I have: friends 66 fury with butchered wiring. I wired in a factory electronic ignition and dual field alternator with electronic voltage regulator. Initially the car started ran good. I shut it off and re-started it several times. It seemed to crank a little much before starting than I'm used to though. two days later nothing. I got it started a few times since but obviously something isn't right. I did a few tests.
Ok here’s what I have. 12.6volts battery
2)Coil + 7.73volts key on
3)Coil + 10.0volts cranking
4)Ballast key on 11.6volts wire from ecu, blue/white tracer to bulk head, blue wire to voltage regulator on same side.
5)Ballast key on 7.8volts brown wire to bulkhead, blue wire to + coil
Does it appear I hooked everything up right? I also found out its not charging.
checked several grounds yesterday and cleaned them up. didn't help.
any help would be apprecieted