Door panel pictures

-

alg

Well-Known Member
Joined
Dec 22, 2011
Messages
88
Reaction score
5
Location
florida
im trying to get my 71 demon back together. I thought I had pictures but as usual, was wrong. Can anyone post pictures of the interior that will show the rear panel (under pop out window) to the floor and then along the sill plate from the inside so that I can see what is supposed to be where? Hopefully withou the rear seat? Some of it seems pretty obvious, but the rest is mystery. Thanks guys.
 
495D73AC-1C20-4708-8AA4-5EC98B111ECD.jpeg
EAD59174-9163-4A7A-9BC4-48FF7FC30609.jpeg
ADFB7ADE-AB06-49F4-A9D9-2CDBA3CB1FC4.jpeg
822F0D27-9CE2-467A-AB16-3F7C0DBC7686.jpeg
Best I’ve got. I did install a plastic moisture barrier behind the panels before install.

0A88F8D1-A7E8-4E18-A8A0-23344A48BA81.jpeg

The area under white line is exposed with panel installed.

35B48295-AED8-4B3C-BB0A-0791858974D8.jpeg
 
Last edited:
THANK YOU! These are perfect. What blue is that? Mine is B5 blue. I’m intsalling carpet too. Did you fold yours over the sill plate?
Did you have any issues installing clips on the panels? They look great.
Thanks again.
 
All the door panels are from Legendary interior. They had the places for the clips stamped just had to pick out the pieces so the clips could go in. The blue is Dodge Viper blue. The carpet after letting sit a couple days to relax I trimmed back to pinch weld lip where inner and outer rockers come together, so yes the carpet is under sill plates and extensions. Thank you.
 
Thanks. Sorry for the delay. I appreciate the pictures. Huge help. Did you find two thicknesses of board in the door panels so the clips go between them? Going to tackle them next. Carpet nearly done.
 
Mine only had one layer of backing board and then a batting material under the vinyl. The clips I slid over the board between that batting.
 
Was there a lot of resistance getting the clips seated? I’m a little concerned about them showing through the vinyl.
 
Sorry I’m late here. What type of door panel clips do you have? The “u” shape slides over the backing board. Can you provide a picture of the clips installed on the panel? If you got it sorted already sorry I couldn’t help.

560B14F4-A37E-447D-A5AC-05E60568AB5D.jpeg
 
-
Back
Top