Anyone using SB Lunati cam ending in 703 Part number?

If so I have a valve timing question. When adjusting the valves (first time fire up) and I'm at TDC the #2 intake is not on the bottom of the lobe. Either is the #8 exhaust. They both are close but not quite there. I don't know if the Lunati grind is a bit different. The Lunati literature calls for the intake to be adjusted when the exhaust starts to open and the Exhaust to be adjusted when to intake is fully opened. I usually use to TDC the turn 90 method but i'm concerned the a may have the cam a tooth off though i checked that more than once. I can call Lunati but i will need to wait until Monday and this will bother me. Thanks