Cheap-ish 360 mods

Just going by my basic build. mild 360 stock pump and pan 5qt of oil press at idle hot was 35psi but when I hit the brakes fairly hard to stop my oil light would come on. the oil was sloshing to the front of the pan and losing oil pressure. to stop this I pulled the pan and made a baffle plate and welded it in the sump of the pan to keep the oil in the sump during hard stops and acceleration. I dont have a picture handy but others have done the same. most "performance" engines had some form of oil control so if your pan dosent have any baffels its a easy upgrade.