I figured you probably would, LOL. That big old flat spot where the factory 8.8 snubber was look like it wouldn't be too hard. Post up some pics of what you come up with.
Sure will do. The OEM ford one was mounted underneath the flat part so i couldent just flip it over and use it as a base plus its all metric hdwr anyways. Prob going to fab up an 1/8" thick flat plate with welded on nuts to bolt down to the top and have something rest across and against that nice flat top part of the casting where the pinion comes out when its screwed down so its in constant contact at this area. I might even just make it adjustable height square tube with hitch pins, and just use an LCA bumper mounted on the top
