car wont start

This is a 4-stroke engine so there two times that the piston is at TDC. You may have the distributer a 180* off. It could be at TDC on #6. Remove #1 spark plug and slowly turn engine over until you feel and hear the piston coming up on compression stroke. Look down on the balancer and you should see the timing marks coming up to TDC. Slowly turn it to TDC and re-install the plug. Look at your rotor, is it pointing to #1 on the cap? If not, re-install distributer to correct. TDC is close enough for it to fire. Later you can adjust the timing.