trunk seal install
I checked out this thread, before I started to installed my trunk seal lip on, found most of the installers were using clamps and tape. If you are using a cement type of adhesive such as 3M black super, or others. Use the lift and press method of installing weather stripping much quicker and alignment is straight. No clamps no waiting to dry, gently lift ( not pull ) the seal up several times depending on the amount of cement used, the air will dry the cement quicker. Clamps may have the tendency of letting the weather stripping shift while trying to air dry....which takes much longer.
I checked out this thread, before I started to installed my trunk seal lip on, found most of the installers were using clamps and tape. If you are using a cement type of adhesive such as 3M black super, or others. Use the lift and press method of installing weather stripping much quicker and alignment is straight. No clamps no waiting to dry, gently lift ( not pull ) the seal up several times depending on the amount of cement used, the air will dry the cement quicker. Clamps may have the tendency of letting the weather stripping shift while trying to air dry....which takes much longer.
