70 up charging system upgrade question

So tests above got me thinking the switch is supplying voltage when it shouldn't.
I left everything hooked up and removed key switch.
1. 12.12V red battery wire at key switch to gnd.
2. Brown wire(feeds ballast) at key switch to gnd. 0.1mV.
Both good right?
Tests on switch itself with it removed.
3. No continuity with key off from "batt" on switch to all other terminals. Good??
4. Key switch "run", "batt" to "IGN1" continuity.
5. Key switch "run", "batt" to "IGN2" NO continuity.
Tests 4 and 5 seem good right??
6. Key "start", "batt" to "ign1" NO continuity.
7. Key "start" "batt" to "IGN2" continuity.
Tests 6 and 7 seem good too.
I'm stumped to say the least...