66 dart rear end swap

David66dart said

Thank you to everyone that replied this should help me get on the right track. How would I go about converting the front to 5×4.5 after putting in a ford 8.8 or making it what ever the bolt pattern is of the 8 1/4 or 8 1/2. Because I obviously want to have one bolt pattern all the way arround the car

Click to expand...

Using factory parts.........donor cars wolud be any 1973 to 1976 "A" body that has an 8 1/4 rear under it; take the rear, shock plates, drive shaft; up front take the upper control arms, spindles, caliper mounts, calipers, don't worry about condition of the rotor, it's easily replaced, just keep track of what the car was you got parts from, this is your reference vehicle.

Good luck