my engine is a 2001 360 magnum block stock bottom end, hughes EQ heads with 2.02 intake valves,TTI step headers, edelbrock performer rpm air gap intake, 750 proform mech. secondary. cam is crate 360 cam supposedly I think its smaller. stops pulling around 5800.
A904 with 2800 stall with forward manual valvebody, 8.75 w/4:10 suregrip
I've gone 12.40 @ 110 in the 1/4 mile with this setup
lookin at Oregon cam #1357 grind
230/
[email protected]
112 lobe separation
.515/.515 w/1.6rockers
this custom one from a member
bullet cam
237/
[email protected]
108 lobe separation
.550/.550 w/1.6 rockers
