ignition

Basically the hot wire at ign is 12.4 (12.6 at batt,+ and at fireall,) So i Lost .2 v along the way inside the dash wiring at the ign switch. Probably not an issue. I hit start, the ign 2 terminal reads 10.9 v at ign switch, and this same brown ign 2 wire at the ballast in start mode reads 10.2 so I lost .5 v at the firewall.
I will go to the starter tomorrow and see what it is dong. Check gap again. I should have some fire at coil UNLESS the dist is the problem, I figure. 9.7 v at coil + in start mode should give some fire at coil wire surely.
Thanks for ll the advice. Tomorrow is another day!!