8.8 swap
This is for 360duster and other drag racers out there. Got this out of my buddys fox 5.0 rebuild book.
It also states the moser c clip eliminators are fine to eliminate slight sideways walk in drag racing, but leak like a sieve if put into hard cornering situations. For that type of driving there is a kit that welds on ends from a ford 9 inch to eliminate the c clips
For my sons car with a mild 4bbl 318 with duals , 42RH OD and 3.73s this setup should be adequate. When more power smokes it, a different LSD carrier will go in its place.
This is for 360duster and other drag racers out there. Got this out of my buddys fox 5.0 rebuild book.
It also states the moser c clip eliminators are fine to eliminate slight sideways walk in drag racing, but leak like a sieve if put into hard cornering situations. For that type of driving there is a kit that welds on ends from a ford 9 inch to eliminate the c clips
For my sons car with a mild 4bbl 318 with duals , 42RH OD and 3.73s this setup should be adequate. When more power smokes it, a different LSD carrier will go in its place.
