Slant 6 Pedals/ clutch linkage swap

Don't forget to reset your freeplay, and you will have to relearn to not push the clutch pedal to the floor anymore so you don't jam the clutch fingers into the disc; start off with extra freeplay. You only need to push the pedal far enough so it doesn't grind going into reverse. When selecting reverse; after depressing the clutch, give the cluster a couple of seconds to stop spinning, then pull the stick. The amount of time required depends on the viscosity and temperature of the oil you are using,and the amount of drag given to the disc by the flywheel, which varies with the amount of departure, and the idle speed.
If you have a diaphragm clutch, remove that big over-centering spring and leave it off.