Yes they are waiting for a cam specs to put springs on ,the heads are real good shape not much $ into them yet. Traded welding for heads. Heard back from 2 cam company. Just waiting to hear from jones
OK, good on that. One other thing... .the Bullet and Lunati cam's look to be trading off lift and adding duration to make up for it. Tends to lessen the low RPM torque...
The Crower cam has more lift and less duration. Have you told Bullet and Lunati that the heads are stock? If so, then they may be limiting lift to around .450-.460" based on that assumption. Know that the heads in stock from limit the lift to around these numbers before the retainers tart to get too near to the seals/guides. But for a more lift/less duration cam (since you say you want to to take off on the low end), your heads are in the shop and they can easily take a bit off of the guides' heights top accommodate a higher cam lift. That might change minds a bit.
