How do you get a Suspension to hook, when the track surface is marginal at best

I Am planning on degreasing my rear housing tomorrow but decide to do a test tonight.
chucked up the housing so that i could rotate it off the ground. using a small 6" level. I set it on the right spring perch and then rotated the housing until the bubble was perfectly centered. Put it on the left spring perch..........Perfect!!!!!!!

My off set front hanger doesn't fit without re bending my fuel feed, and return line and the brake line on the other side.:(
Got the fuel line massaged tonight. Will have to cut the brake bracket out of the way tomorrow to get the driver side to fit and then fined a new way to support the brake line..........