Another short GoPro video

-
Sounds good ! a good mixture between tame and radical. nice street strip combo, for sure !
 
thats the ****....... the launch at 1.39 lets ya know its a MOPAR. whats the outside of the car look like?
 
That was pretty cool! I showed it to my wife and I gave her some deja vu. except for with a 4-speed I kind of got to get it into second gear or else it's just a total smoke show in 1st.
I want to make a video too.
 
thats the ****....... the launch at 1.39 lets ya know its a MOPAR. whats the outside of the car look like?
thats the ****....... the launch at 1.39 lets ya know its a MOPAR. whats the outside of the car look like?




1E0513F1-02E1-4489-80EE-281C45EFA3F1_zpsem7ywae2.jpg


826FBB37-9173-4218-B332-FDF2C3535C7A_zpspsy3ohpn.jpg
 
One of the best dam cars I've ever seen.

The fab work and detail is second to none.

You've got every reason to be proud of your car.

Keep up the good work.
 
One of the best dam cars I've ever seen.

The fab work and detail is second to none.

You've got every reason to be proud of your car.

Keep up the good work.


Thank you very much! I appreciate the kind words! I’ve grown with the car and pushed my abilities. I’m very proud of what it’s become! This site has been a very big part of that! I’ve learned allot from the members here that have bent over backwards to teach me! Thank you guys for sharing that with me
 
Thank you very much! I appreciate the kind words! I’ve grown with the car and pushed my abilities. I’m very proud of what it’s become! This site has been a very big part of that! I’ve learned allot from the members here that have bent over backwards to teach me! Thank you guys for sharing that with me
I might have missed it , but what rear gears and tires ?
Car is kick *** ! Wish I had the coin to build a 68 dart to go w/ my 68 fish.
 
It has been great watching this super MoPar grow :) Great ride and congratulations Yonggun :thumbsup::thumbsup:
 
Nice. Whats the combo, sounds very strong? What carbs and tunnel ram did you use?
Here's a inside vid of my 67 Barracuda with 511 on QTP's.



It’s low deck 470”. Molnar 3.91” crank, scat 6.7” rods and diamond step dish pistons. 1.320” compression height. 11cc dish at zero deck. Makes 10.62:1 compression. Comp solid roller. 254@ 050 and .598 lift. Trickflow 240 heads, Weiand tunnel ram port matched with duel Biggs 750’s.
 
Very nicely tuned and clean. I think those 470's are snappier than the 511's. Very simular build to mine, except i used a Molnar 4.25 stroke crank with MW victors and a 270@50 SFT. Whats the lobe sep on the cam? Whats the combo on the exhaust? Sounds killer.
 
Very nicely tuned and clean. I think those 470's are snappier than the 511's. Very simular build to mine, except i used a Molnar 4.25 stroke crank with MW victors and a 270@50 SFT. Whats the lobe sep on the cam? Whats the combo on the exhaust? Sounds killer.

110* TTI 2”-21/8” step headers into TTI 3” h-pipe exhaust into dynamax 12” bullets dumped in front of rear diff
 
Nice! Send more. And, keep it under a hundred....not much sweeter than the sound of a Mighy Mopar!
 
110* TTI 2”-21/8” step headers into TTI 3” h-pipe exhaust into dynamax 12” bullets dumped in front of rear diff
ok, i have 2" header with 3.5 collector and pipe. Thinking about reducing to 3" exhaust pipe. Do you lock your timing or use a curve? Whats your max timing you found to work best? Thanks again and nice ride.
 
ok, i have 2" header with 3.5 collector and pipe. Thinking about reducing to 3" exhaust pipe. Do you lock your timing or use a curve? Whats your max timing you found to work best? Thanks again and nice ride.
are u running 3 1/2" all the way / don't reduce it , u will be able to tell the diff. !
 
-
Back
Top