Window slide? 68 Fastback

Look at the pictures i posted above (post #13), cut that same notch at one end (top), keep in mind a left and right as they are curved with the glass.
Test fit the weatherstrip and glass in the frame, If I recall the weatherstrip goes to the to of the glass (ignoring the notch in the glass).
Make sure you slide the weatherstrip all the way up, not the placement of the glass in the weatherstrip (the sides of the weatherstrip should go to the top off the glass ignoring the notch)
Once you confirm that then remove them from the frame and put the weatherstrip on the glass and note the hole locations.
I was able to pinch the weatherstrip and punch both sides at once.
Trim the bottom of the weatherstrip at the bottom of the glass.


Alan